Galvanized roofing nails are the mostly used roofing nails with less cost and good property. Hot dipped galvanized nails offer higher strength and longer life compared with electro galvanized nails. HDG (simplified term for hot dipped galvanizing) nails can be made with Smooth shank or ring shanks, flat top or umbrella head.
Hot dipped galvanized roofing nails with umbrella head and ring shanks are durable and firmly fixed, especially suitable for tropical areas house buildings. Three reasons of choosing: First, Twist ring shank roofing nails galvanized are used extensively in post frame construction due to their superior performance. The nails have approximately twice the withdrawal resistance of smooth-shank nails of the same diameter. Second, the umbrella head offers bigger strength compared with flat head nails; third, the HDG treatment guarantees a long term use of the roofing nails.
Types:
Roofing nails umbrella head
size: 9 1/2 x 2"
packing: 1 kg plastic bag and 25 bags per box
Finished: hot dipped galvanised
Special request: logo in each bag and box per customers request.
Zinc coated roofing nails, flat head 3.0x31.75mm.
Roofing nails made of construction hardware material
11 Gauge Umbrella Head Nails
Specially for
Construction And Building Uses.
Galvanised Roofing Nails and Steel Rods
Angle bars 3mm x 50 mm x 50 mm x 6 meter
Angle bars 3mm x 75 mm x 75 mm x 6 meter
Angle bars 4mm x 50 mm x 50 mm x 6 meter
Wire tying 1 mm
Flat bars 3 mm x 75 mm x 6 meter
Galvanized Pipe 40 gage 100mm” x 6 meters GI
Galvanized Pipe 40 gage 50mm x 6 meters GI
Galvanized Pipe 40 gage 75mm x 6 meters GI
Iron Pipes 4x75 mm dia x 6 meter long
Steel bars deformed 10mm dia x 12 meter long
Steel bars deformed 15 mm dia x 12 meter long
Steel bars deformed 18 mm dia x 12 meter long
Steel bars plain 12 mm dia x 12 meter long
Steel plate thick 1½mm size 4’ x 8’
Steel plate thick 2mm size 4’ x 8’
Tube Iron 25 mm x 50 mm x3mm x 6 meter
Wire nail 3”, 15 gauge metal
Wire nail 4”, 8 swg gauge metal
Wire nail 6”, 8 swg gauge metal
Zig zag nail¾”
Roofing nails umbrella head
Size: 9 1/2 x 2"
Packing: 1 kg plastic bag and 25 bags per box
Finished: galvanised hot dipped
Hot dipped galvanized Round head common nails
for Roofing uses
Size 1“ 1-1/4” 1-1/2” 2“ 2-1/2” 3“ 4” 5“ 6” 7“ 8”
Hot-dipped Galvanised Round Head twisted nail
Size 1“ 1-1/4” 1-1/2” 2“ 2-1/2” 3“ 4”
Roofing nails for binding of drywall to wood to secure the shingles
Technical Info:
Nail Head Size(mm): 18mm/20mm
Head Type: Umbrella head
Roofing Nails Shank Type: twisted shank
Finish: Galvanized, hot dipped
Specification:
2-1/2x BWG8-BWG11
Galv.Umbrella Head Roofing Nails, (18mm Head x 40mm long, smooth shank)
Specification:
Twisted/Galvanized
2 ½” , (63.5mmL, Dia3.7mm-4mm),
Dia 3.7-4.0mm*2.5"
The material is Q195,and the chemical compositions are:
C:0.06-0.12,
Mn:0.25-0.50, tensile strength:315-430MPa
Si:≦0.30 , Elongation:≧33
S:≦0.050 ,
P：≦0.045
Packing of 50 kgs. in gunny bags
Roofing Nails: Umbrella Head – Twisted – Galvanized Polish - 3 inch 9 Gaze (Gaze refers thickness) – Packed in 50kg Jute bags.
Umbrella roofing nails 2" in size
2 1/2" twisted and 3" twisted roofing nails
Hot Dipped Galvanised Roofing Nails (Twisted Shank)
2-1/2'' BWG 9 with umbrella head
Packing
in 25 kg box.
3 1/4" and a 3 1/2" Roofing nail and 3" galvanised roofing nails.
Bench press head of the roof nail, dimensions:
Weight = 2.82gr
Diameter = 20.10 mm
Thickness = 1.20 mm
Hole diameter = 3.41mm
Available Sizes：
| Specification | Twisted or Plain | Cap Diameter |
| 9# x 2-1/2,2,3 | Twisted or Plain | 20mm |
| 10# x 2-1/2,2 | Twisted or Plain | 20mm |
| 12# x 2,1-1/2 | Twisted or Plain | 18mm |
| 13# x 1-3/4,2,1-1/2 | Twisted or Plain | 15mm |
HOT DIPPED GALVANIZED ROOFING NAILS (FOR SHINGLES) WITH HEAD DIAMETER 8.5MM
50 Lbs./box.
1 x BWG-11
1-1/2 x BWG-11
Phosphate-coated Drywall Nails
Cup head: 1-1/4 to 2-1/4"
Neoprene washer roofing nails: 1-1/2 to 3-1/2"
Pole barn nails: 3-1/2 to 6"
Colored-panel board nails: 1 to 1-5/8"
Square-head roofing nails (smooth): 3/4 to 4"
Hot Dipped Galvanised Roofing Nails (Twisted Shank) of 2-1/2'' with umbrella head in 25 kg box.
Roofing Nails Sizes: |
|
| BWG 8x2", 2-1/2" | BWG 9x2", 2-1/2", 3" |
| BWG 10x2, 2-1/2", 3" | BWG 11x2", 2-1/2", 3" |
| 60mmx 3.15mmx18mm as per Ethiopian Standard ESG. B4. 120 | |
[Shank Types:] Roofing nails can have smooth shank, ring shank and screw type shank…..
[Materials and Finishes:] Galvanized nails, copper nails and stainless steel nails make the majority of roofing nails materials. Uses vary with metal materials.
[Common Nails for Specific Uses:] Common iron nails can be used in concrete, furniture and boat making….
[New Nails:] Sofa Nails Carbon Steel Nails for Ship Building